- The moisture barrier film and tape strip combine to lock out moisture and allow for quick and easy installation
- Provides cushioned comfort under laminate and floating wood floors
- Eliminates minor subfloor imperfections
- Suitable for use with radiant heat flooring systems
- 100% recyclable, environmentally friendly
- Naturally resistant to mold and mildew
- Non allergenic and odorless
APPROVED SUBSTRATES
- Dry, completely cured concrete (at least 14 days old with HVAC operating)
- 3/4" interior plywood or OSB flooring
- Waterproofing and crack-isolation membranes
- Cement backer units
FLOOR PREPARATION
- Subfloor should be clean and dry
- In geographic areas where concrete subfloors are subject to excessive moisture, a calcium chloride moisture test is required. Vapor emission readings in excess of 3 lbs. per 1,000 square feet in 24 hrs will require additional protection such as concrete sealant or polyethylene sheeting.
QUICK AND EASY INSTALLATION
Requires no additional seaming tape, cuts with a knife
- Roll out underlayment with tape strip next to wall. Roll out next row in same manner butting underlayment close to first row (do not overlap) and covering the moisture barrier film. Remove the tape strip and secure the overlapping moisture barrier film.
- Install flooring according to the manufacturer's installation instructions
PACKAGING
Available in 4' x 25' (100 sq. ft.) rolls and 4' x 250 (1000 sq. ft.) contractor size rolls
TECHNICAL DATA
100% polypropylene closed cell foam
Thickness — .080"
Weight — 2 lbs. per roll
Moisture Barrier — with lip and tape sealing system
SOUND ABSORPTION PROPERTIES
Impact Insulation Class (IIC) This method is to measure the impact sound transmission performance of a floor-ceiling assembly (sound transmission through the floor)
IIC Flooring Sub-Floor
61 Laminate/Engineered Wood 6" concrete with ceiling assembly
54 Laminate/Engineered Wood wood joist with ceiling assembly